Customization: | Available |
---|---|
Type: | Lithium Ion Battery |
Charger Type: | Solar Charger |
Still deciding? Get samples of US$ 350/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
LiFePO4 POWER STORAGE WALL
Long life and safetyItems | Specification | Remark |
Nominal Voltage | 51.2V | |
Capacity | 100AH (51.2KWh) | |
Charge limit voltage | 58.4V | Max |
Working Voltage | 44.8-58.4V | |
Standard charging current | 20A | 0.2C |
Maximum charging current | 100A | Based on the working current of BMS |
Discharge cut-off voltage | 44.8V | |
Standard discharge current | 20A | 0.2C |
Maximum discharge current | 100A | Based on the working current of BMS |
Cell model | LFP 3.2V 50Ah | |
Shell main material | cold rolled steel | |
Dimensions | 640*430* 185±3mm(without mounting angle) | |
Battery weight | 55kg±2kg | Installation configuration not included |
Range of working temperature | Charge: 0C~45ºC | At10%-90%RH |
Discharge: -20ºC -60ºC |
The above dimensions are the dimensions of the main body of the product, excluding accessories .
1 | Breaker | Input and output power switch |
2 | P+ | Positive connector, input and output positive interface |
3 | Weak current switch | BMS Turn On/OFF |
4 | P- | Negative connector, input and output negative interface |
5 | GND | Ground connection |
6 | Reset switch | Reset button switch (hidden), long press 3S to take effect. |
7 | DIP switch | When performing multi-machine parallel communication operation , it is necessary to configure the dial address first. |
8 | Dry contact interface | Dry contact interface |
9 | RS482- 1/CAN | Host computer communication debugging interface and inverter communication interface |
10 | RS232 | Host computer communication debugging interface |
11 | RS485-2 | Multi-machine parallel communication interface |
MODEL | HSI 1000S | HSI 1500S |
INVERTER OUTPUT | ||
Rated Output Power | 1,000W | 1,500W |
Peak Power | 2,000VA | 3,000VA |
Rated Output Voltage | 230Vac,Single-Phase | |
Load Capacity of Motors | 1HP | |
Output Frequency | 50Hz/60Hz | |
Rated Output Voltage | pure sine wave | |
Switch Time | 10ms(Typical) |
BATTRY | |
Battery Type | Li-ion / Lead-acid / User-defined |
Rated Battery Voltage | 12V |
Battery Voltage Range | 10.5~15.5Vdc |
Max. PV Charging Current | 60A |
Max. Utility/Generator Charging Current | 60A |
Max. Hybrid Charging Current | 120A |
PV INPUT | |
Num. of MPPT | 1 |
Max. PV Array Power | 1,000W |
Max. Input Current | 60A |
Max. Open-circuit Voltage | 108Vdc |
MPPT Voltage Range | 15~90Vdc |
UTILITY / GENERATOR INPUT | ||
Input Voltage Range | UPS Mode:170~280Vac;APL Mode:90~280Vac | |
Frequency Range | 50/60Hz | |
Bypass Overload Current | 6.5A | 9.7A |
GENERAL | |
Dimensions | 357.5*235*103mm |
Weight | 5.5kg |
Protection Degree | IP20, Only indoor |
Operating Temp. Range | -10ºC~55ºC |
Cooling Method | intelligent fan |
Warranty | 18 Mouths |
COMMUNICATION | |
Embedded Interfaces | RS485 / USB / Dry contact |
External Module (optional) | Wi-Fi / GPRS |
Our battery products cover multiple fields and are widely used, supporting customer customization.
1. Forklift Battery | 2. Golf Cart Battery | 3. LiFePO4 Battery Packs |
4. Telecom Lithium Battery | 5. UPS Lithium Battery | 6. AGV Battery |
7. Customized lithium battery | 8. Power Bank | 9. Home Energy Storage |
Q1: What payment terms do you accept?
* Do not use other types of chargers to charge the lithium battery, you need to use a special charger for lithium batteries.